IKEA Komplement soft closing hinges are a great way to keep your doors from slamming shut. But what do you do when they stop working?
When you have IKEA furniture with Komplement soft-closing hinges, it’s very frustrating when they suddenly stop working.
The good news is that there are a few things you can do to troubleshoot and fix the problem.
IKEA Komplement Soft Closing Hinge Not Working
A few common reasons mentioned in bullets why the IKEA Komplement hinge does not work are:
- The Hinge is not installed properly
- Something is blocking the Hinge from closing properly
- The tension needs to be adjusted
- The batteries are not properly seated
- The Hinge needs to be replaced
- Loose Screws
- Misaligned Hinge and plate
A common reason for this issue?
An installation error is one of the most common causes of soft closing hinges not working.
When installing IKEA Komplement soft closing hinges, it is important to ensure that all screws are securely fastened and that the hinge arms are properly aligned and leveled for optimal operation.
In some cases, if screws have been over-tightened or not tightened enough, the Hinge may not be able to close all the way or will not remain in its closed position.
If the hinges are properly aligned and level, they may avoid interfering with one another when opening and closing, which can cause them to become stuck in place.
Here are some troubleshooting tips to get your doors back in working order.
- Install Hinge Properly
Make sure that the Hinge is properly installed. If the Hinge is installed correctly, it can prevent the soft closing mechanism from malfunctioning.
To properly install the Hinge, follow the instructions in the Komplement installation guide.
- Check for Obstructions
If the Hinge is installed correctly and there are no obstructions, check to see if something is blocking the Hinge from closing properly.
Sometimes dust or dirt can build up and prevent the Hinge from closing. Use a soft cloth to wipe away any obstructions.
- Adjust the Tension
If the Hinge still needs to be closed properly, you may need to adjust the tension. You can adjust the tension by turning the adjustment screw on the Hinge’s side.
To increase the tension, turn the screw clockwise. To decrease the tension, turn the screw counterclockwise.
- Batteries Must Be Properly Seated
The batteries must be properly seated in the Hinge. To ensure the batteries are properly seated, open the Hinge and look at the battery compartment.
The batteries should be flush with the battery compartment. If the batteries are properly seated, they can be adjusted. Use a small flathead screwdriver to gently pry the batteries out of their seats.
Once the batteries are removed, clean the battery contacts with a soft cloth. Place the batteries back in their seats and flush them with the battery compartment.
- Replace the Hinge
If you’ve tried all of the above troubleshooting tips and the Hinge still isn’t working, you may need to replace the Hinge.
You can purchase a new Komplement hinge from IKEA or an authorized IKEA retailer. The price of the Hinge will vary depending on the model and finish.
Installing a new Komplement hinge is a simple process. Just follow the instructions in the Komplement installation guide.
Once the Hinge is installed, your doors should be back to closing smoothly and quietly.
If you have followed the installation guide properly and the IKEA Komplement hinge still does not work, check to see if any of the common reasons above apply to your situation.
If so, take the appropriate measures to fix the issue. If none of the common issues are applicable, you may need to replace the Hinge. Or contact IKEA for further Assistance.
- Loose Screws
The most common cause of an IKEA Komplement soft-closing hinges not working is loose screws.
The hinges are designed to close slowly and smoothly, but if the screws are not sufficiently tightened, it can result in a jerky or uneven motion when closing the door.
Checking that all screws on the Hinge are securely screwed into place will often solve the issue.
- Misaligned Hinge and Plate
Another possible cause of an IKEA Komplement soft-closing hinges not working is that the Hinge and plate may need to be aligned.
This can affect the smoothness of door closure, making it difficult to open and close the door. Carefully aligning the Hinge with the plate can often solve this issue.
- Damaged Hinges
In some cases, the soft-closing hinges may be damaged or worn out, which can cause them to malfunction.
It should be replaced if the Hinge is visibly cracked, broken, or worn. Replacing old door hinges with new ones will often restore their smooth operation.
- Dirty or Bent Doors
Sometimes dirt and debris can accumulate around the hinges, making them stick and causing them to malfunction.
Cleaning the Hinge with a soft cloth or brush may help restore its functionality.
Additionally, if the door is bent, it can prevent it from closing properly, resulting in an uneven motion when closing. If the door is bent, it should be straightened before using the soft-closing Hinge.
- Incorrect Installation
Incorrect installation can also cause an IKEA Komplement soft-closing hinge not to work properly.
Carefully review the instructions when installing the hinges and ensuring that they are securely mounted will often solve this issue.
Additionally, ensuring that the screws are tightly fastened and aligned correctly with the plate will help ensure that the soft-closing Hinge works as intended.
How to check for installation errors?
To ensure that your IKEA Komplement soft closing hinges are properly installed, take a step-by-step approach when installing them.
Start by checking that all screws are securely fastened and that the hinge arms are aligned and level.
When you open and close the door multiple times, ensure no interference with other components on the door or cabinet frame.
If you notice any problems, adjust the screws or hinges to ensure they are properly aligned.
Adjustment Button
IKEA Komplement soft closing hinges are designed to close kitchen cabinet doors quietly and softly.
The hinge mechanism is adjustable, allowing the user to modify the force with which the door closes. This adjustment can be made by pressing a small button at the top of the Hinge.
Pressing this button controls whether or not the door will close completely based on the amount of pressure applied.
When IKEA Komplement soft closing hinges need to be fixed, it is usually because the adjustment button has become stuck in an incorrect setting.
This prevents the door from closing softly and quietly as intended.
To remedy this problem, press the adjustment button until you hear a clicking sound, indicating that the force has been restored to its original setting.
If the Hinge still does not seem to be working properly after adjusting the button, it could be due to a worn-out part or a broken spring.
To replace these parts, you must remove the Hinge from its mounting brackets and disassemble it.
Replacement parts can be purchased at any home improvement store or online retailer.
Once the new part is in place, you should reassemble the Hinge and reinstall it onto the cabinet door to test if it works correctly.
If, after replacing any worn-out parts, the IKEA Komplement soft closing hinge still isn’t working properly, the problem may be due to an incorrect installation.
Ensure that the Hinge is aligned with the cabinet door and that all its mounting screws are secure.
If everything appears to be installed correctly, there may be a gap between the door and frame which prevents the Hinge from closing softly. A few shims can easily fix this issue.
When to get in touch with IKEA?
If you have an IKEA Komplement Soft Closing Hinge that is not functioning properly, it is essential to contact the company as soon as possible.
Not only will this help ensure that your product functions correctly, but it can also help prevent further damage.
Usually, customers who get in touch with IKEA have received a replacement part or had their product repaired.
Concluding Thoughts:
IKEA Komplement soft closing hinges are designed to close kitchen cabinet doors quietly and softly. However, if a hinge is not functioning properly, it could be due to an incorrect installation, a worn-out part, or a broken spring.
To fix this issue, carefully review the instructions when installing the hinges and ensure that they are securely mounted with all screws tight.
If problems still occur, it is important to contact IKEA as soon as possible to receive a replacement part or have the product repaired.
With proper installation and maintenance, your IKEA Komplement soft closing hinges should provide you with years of smooth and quiet operation.
