The IKEA whirlpool dishwasher is a popular choice for many consumers because of its low price and good performance. However, some users have experienced noise problems with this dishwasher model.
Some users report that their IKEA whirlpool dishwasher makes loud, grinding noises during the wash cycle. Others say the dishwasher is very noisy overall, even when it’s not in use.
If you’re experiencing noise problems with your IKEA whirlpool dishwasher, a few things can be done to fix the issue, but first, it’s necessary to identify it.
Troubleshooting IKEA Whirlpool Dishwasher Noise Problems:
Reasons why the IKEA whirlpool dishwasher makes noise
There are several possible causes of noise problems with IKEA whirlpool dishwashers. One possibility is that the dishwasher’s drain pump is clogged. Another possibility is that the dishwasher’s water inlet valve is defective.
If your dishwasher is making a grinding noise, the drain pump likely is the culprit.
A clogged drain pump can cause the dishwasher to make loud noises as it tries to pump water out of the dishwasher. Now let’s get to the part where we fix these issues.
- Clear Build-Up
The most common cause is the build-up of food debris and grease on the dishwasher’s spray arm. This can happen if the dishwasher isn’t used often or isn’t cleaned properly after each use.
If you don’t remove this build-up, it can block the spray arm and cause the dishwasher to make a loud noise. To clean the spray arm:
- Carefully remove it from the dishwasher and soak it in a solution of equal parts vinegar and water.
- Keep it soaked for a few hours, then scrub it with a brush to remove any remaining debris.
- Once the spray arm is clean, reattach it to the dishwasher and run a cycle to see if the noise has stopped.
- Loose Parts
Another common cause of dishwasher noise is loose parts. Over time, vibration can cause screws and other small parts to come loose. This can lead to rattling or banging noises when the dishwasher is running.
Check the dishwasher for loose screws or other parts to fix this problem. Tighten any loose screws and make sure all details are secure.
Once everything is tight, run a cycle to see if the noise has stopped.
- Worn Motor Mounts
If the dishwasher noise is loud, it could be due to worn motor mounts. The motor mounts keep the dishwasher’s motor in place and help reduce vibration.
If neglected, the motor can move around and cause the dishwasher to make a lot of noise. To replace the motor mounts, you’ll need to have the dishwasher serviced by a qualified technician.
- Check the Water Inlet Valve
If your dishwasher is noisy and isn’t filling with water, the problem could be the water inlet valve. This valve controls water flow into the dishwasher and can become clogged or damaged over time.
To check the water inlet valve, remove the hose from the back of the dishwasher and turn on the water.
If water doesn’t flow freely through the hose, the valve is probably clogged and will need to be replaced. The float switch could be problematic if the water inlet valve works properly.
This switch is located inside the dishwasher and controls the water flow into the machine. If the off position is stuck, the dishwasher won’t fill with water and will be very noisy.
To fix this problem, you’ll need to have the dishwasher serviced by a qualified technician.
- Dishwasher Not Level
If your dishwasher isn’t level, it can vibrate and make a lot of noise. To level the dishwasher:
- Consider adjusting and balancing the legs at the bottom of the machine.
- Turn each leg until the dishwasher is leveled from front to back and side to side.
- Once the dishwasher is level, run a cycle to see if the noise has stopped.
- To Prevent the dishwasher noise
- Run the dishwasher regularly to prevent grease and food build-up, even if it’s not full.
- Clean the dishwasher regularly with vinegar and water to remove any build-up.
- Tighten any loose screws or parts to prevent rattling noises.
- Make sure the dishwasher is level to prevent vibration.
- If the noise persists, have the dishwasher serviced by a qualified technician.
