IKEA Dishwasher noise on start-up can have many causes, some easy to fix and others requiring service. IKEA dishwashers are generally very reliable and don’t require much maintenance.
However, like any appliance, they can break down or make noise from time to time. If your IKEA dishwasher is making noise, it’s necessary to identify the potential causes.
You can often fix the dishwasher without calling for service by troubleshooting the noise.
Why Is The IKEA Dishwasher Start Noisy?
Common reasons why the IKEA dishwasher start is noisy include
- Wash Cycle is Not Set Correctly: If the wash cycle is set for a longer period than necessary, the dishwasher will make a noise as it washes and rinses the dishes. To fix this, adjust the wash cycle to the appropriate setting.
- The Dishwasher is Not Level: If your dishwasher is not level, it will make a noise as it runs. To fix this, use a level to adjust the legs of the dishwasher until it is level.
- Adjust Water Pressure: If the water pressure in your dishwasher is too low, the dishwasher will make a noise as it tries to operate with insufficient water. To fix this, increase the water pressure in your dishwasher.
- There Is Something Caught in the Pump: If there is something caught in the pump of your dishwasher, it will make a noise as it tries to operate. Remove the object from the pump and clean out any debris to fix this.
Here’s how you can additionally troubleshoot these issues.
- Check Water Supply Connection:
Check that the water supply connection to your dishwasher is secure and not leaking. If it is loose or leaking, this could cause the noise.
- Check the Inlet Screen:
The inlet screen is located where the water enters the dishwasher. Over time, this screen can become clogged with dirt and debris, which can cause noise when starting up. Remove the inlet screen and clean it off to see if this fixes the problem.
- Incorrectly Installed Dishwasher:
Another possibility is that the dishwasher was not installed correctly. This could cause the dishwasher to vibrate. Did you install the dishwasher yourself?
Check the installation instructions to make sure everything is correct. If not, consider calling a professional to fix it.
- Inspect Water Inlet Valve:
The water inlet valve might be the issue if the noise only occurs when the dishwasher is starting. It could be that the valve is not opening or closing properly, which would cause a banging noise.
The water inlet valve is a common issue with IKEA dishwashers.
If the noise only occurs when the dishwasher is starting up, the water inlet valve is likely not opening or closing properly. Check the water inlet valve by removing the kickplate and looking for a loose wire or blockage.
- Dishwasher Is Not Level:
If the dishwasher is not level, this can also cause noise. The leveling legs should be adjusted, so the dishwasher is leveled with the countertop. Use a leveler or straight edge to ensure the dishwasher is level.
Place the leveler on the dishwasher and check to see if it is level. If it is not, adjust the leveling legs until it is level.
- Loose Parts:
There’s a possibility that loose parts inside the dishwasher are banging around and causing the noise.
You can try opening up the dishwasher and inspecting it to see if there are any loose parts. If you find any, you can try to snug them up or replace them.
- Worn Out Pump:
The dishwasher pump might be worn out if the noise is a grinding sound. This is a more serious issue and will require a repair or replacement.
You should contact an appliance repair technician if you think the noise is coming from the dishwasher pump.
- Dirty Filter:
A dirty filter can also cause noise. The dishwasher filter requires monthly cleaning to prevent build-up. To clean the filter, remove it and rinse it with water. It is ideal for cleaning the filter after each use, but at least every month or two.
- Faulty Drainage
The dishwasher drainage system could be the issue if you hear a gurgling sound. A clogged drain line or the air gap could be the issue.
The air gap is located on the back of the dishwasher and allows air into the dishwasher to prevent water from siphoning back into the sink.
If the air gap is clogged, water can siphon back into the dishwasher and cause noise. Check the air gap and clean it out if necessary.
You should also check the dishwasher drain line for any clogs. If you find a clog, you can try to remove it with a plunger or a plumbers snake. You need to call a professional if you can’t remove the clog.
- Dishwasher Needs Repair:
If neither of these is the problem, it is possible that the dishwasher itself needs repair. In this case, contact a qualified appliance repair person to diagnose and fix the problem.
Concluding Thoughts:
If your dishwasher is making noise, there are several potential causes. First, check to see if anything is loose or leaking. Next, inspect the water inlet valve and ensure it properly opens and closes.
If the noise only occurs when the dishwasher is starting up, the water inlet valve is likely not opening or closing properly.
If the dishwasher is not level, this can also cause noise. The leveling legs should be adjusted, so the dishwasher is leveled with the countertop. Use a leveler or straight edge to ensure the dishwasher is level.
There’s a possibility that loose parts inside the dishwasher are banging around and causing the noise.
You can try opening the dishwasher and inspecting it to see if there are any loose parts.
If you find any, you can try to snug them up or replace them. The dishwasher pump might be worn out if the noise is a grinding sound. This is a more serious issue and will require a repair or replacement.
