IKEA Tarva Dresser Drawers Fall Out
Before you begin troubleshooting this issue, gathering all the necessary tools out of your toolbox is necessary.
The most crucial tool for this job is a screwdriver that fits the screws used to secure the IKEA Tarva dresser drawers.
You may need an adjustable wrench, a hammer, wood glue and a pair of pliers if needed.
Having all these tools close by will save you time and make your repair process easier.
Once you have all the necessary tools, it’s time to start fixing your drawers.
- Tighten Screws
Begin by removing all the drawers from the dresser. Inspect each drawer for any visible damage or missing screws.
If you find any loose screws, tighten them with a screwdriver and check if that fixes the issue.
You’ll need the hammer and adjustable wrench if the screws are stuck and you need to remove them.
If the drawers still feel loose after tightening the screws, then it’s likely that something else is causing them to fall out – this could be a warped frame or drawer runners.
You may need to adjust the dresser runners or replace them entirely with new parts to fix this issue.
You could apply wood glue to the frame and drawer runners for a more permanent solution. Reassemble the dresser with the new parts and check if all the drawers are secure now.
- Use Wood Glue
Wood glue is a great way to fix IKEA Tarva dresser drawers that keep falling out.
It provides a strong bond between the drawer’s wood and the frame, keeping everything together and preventing further damage or sagging.
Start by cleaning off both pieces’ surfaces with sandpaper before applying a thin layer of wood glue to both surfaces.
Make sure that the glue is spread evenly, then let it sit for a few minutes before bringing the two pieces together.
After pressing them firmly, you can use a clamp or heavy objects to keep everything pressed until the glue has dried completely.
Once the wood glue has dried, your dresser should be as good as new and you won’t have to worry about further damage or sagging drawers.
Wood glue is a great way to keep your IKEA Tarva dresser drawers in place, but should only be used as a temporary solution.
If the drawers continue to sag, it might indicate more serious damage that needs to be addressed.
If this is the case, you should contact IKEA directly for instructions on how to fix your dresser properly.
Using wood glue is an easy and cost-effective way to ensure your drawers stay put without worrying about them falling loose or falling out again.
You won’t have to worry about further damage or sagging due to a strong bond between the wood and frame.
- Tighten Down the Fasteners
One of the most common reasons why IKEA Tarva dresser drawers fall out is because the fasteners have become loose over time.
To fix this issue, it can be helpful to check all of the screws and bolts on your Tarva dresser and make sure they are tightened down properly.
You may need a screwdriver or an Allen key to do this.
Once you have checked and tightened down any fasteners that may be loose, your drawers should be secured and not fall out once again.
It can also help add a touch of wood glue or epoxy along the edges of each drawer where it meets the frame to further secure them in place.
This is especially helpful if the fasteners could not be tightened enough.
You may want to consider adding felt or small rubber bumpers on the corners of each drawer and along the edges of where they meet with the frame to reduce any noise and further prevent them from falling out.
- Use a Plastic Wedge Tool
If your IKEA Tarva dresser drawers are constantly falling out, the best and quickest solution is to use a plastic wedge tool.
This type of tool can be found in any hardware store or online.
The wedge tool works by sliding into the groove between the drawer and dresser wall, creating friction that results in a secure fit.
It is a good alternative to drilling holes, as it provides a secure fit that does not require any tools.
The wedge tool can be adjusted in size so it fits perfectly into the groove for an even better grip.
In addition, plastic wedge tools are inexpensive and easy to use, making this an ideal solution for fixing Tarva dresser drawers that won’t stay in place.
With a few minutes of your time and a plastic wedge tool, you can easily fix the drawers so they no longer fall out.
Alternatively, if your IKEA Tarva dresser drawers have become loose or wobbly from use over time, you may need to use more than just a plastic wedge tool.
In this case, you may need to use wood screws and a drill for a more permanent fix.
Be sure to measure the drawer and the wall opening carefully before drilling any holes, as this will ensure that the screw is in the right spot and won’t damage either surface.
Securely fastening them with screws will give you a sturdier and more reliable hold. Whatever solution you choose, ensure it works for your particular situation and is safe to use.
- Align Drawer Slides
The most common reason is that the drawer slides are not properly aligned. To fix this, first, make sure that the drawer is level.
Use a spirit leveler to check if the drawer is leveled from front to back and side to side. If it is not ideal, use shims to level it out.
Once the drawer is level, check the alignment of the drawer slides.
The slides should be parallel and level with the drawer opening. If not, loosen the screws that hold the slides in place and adjust them until they are level.
Once the slides are properly aligned, tighten the screws to secure them.
- Check Drawer Stop
Another possible reason your IKEA Tarva dresser drawers are falling out is that the drawer stop is not properly adjusted.
The drawer stop is a small piece of metal that prevents the drawer from being pulled out too far. Ensure that the drawer is completely closed to adjust the stop.
Then, find the screw that adjusts the drawer stop and turn it clockwise to move the stop closer to the drawer opening.
Turn it counterclockwise to move the stop away from the drawer opening.
Adjust the stop until it is in the correct position, and then tighten the screw to secure it. Screwing the stop may seem easy, but it is essential to use the right technique.
- Replace Damaged Drawer Slides
If your IKEA Tarva dresser drawers are still falling out after you have aligned the drawer slides and adjusted the drawer stop, the drawer slides may be damaged.
If the drawers a damaged, you will need to replace the drawer slides.
You can buy replacement drawer slides at most hardware stores.
To install the new drawer slides, remove the old ones by loosening the screws that hold them in place. Then, position the new slides in the same location and screw them.
- Check for Objects Blocking the Drawer
If your IKEA Tarva dresser drawers still fall out, something may be blocking the drawer from opening.
To check for this, open the drawer and look inside to see if any objects are blocking the path of the drawer. If you find anything, remove it and try opening the drawer again.
- Fix Drawer Fronts
Another possible reason is that the drawer fronts must be properly attached to the dresser. To fix this:
- Remove the drawer fronts by unscrewing the screws that hold them in place.
- Check to see if the drawer fronts are properly aligned with the dresser.
- If they are not, realign them and screw them back into place.
If your IKEA Tarva dresser drawers are still falling out after you have tried all of these options, there may be a problem with the dresser itself.
In this case, you may need to contact IKEA for assistance. We hope this information is helpful.