If your IKEA LAGAN dishwasher isn’t working properly, there are a few things you can do to troubleshoot it.
It’s advisable to always read the user manual that comes with the dishwasher to see if there are any specific instructions for troubleshooting. If not, here are a few general tips:
– Check that the dishwasher is properly plugged in and that the power source is working.
– Make sure that the water supply to the dishwasher is turned on and there is enough water pressure.
– Check the filters and spray arm to see if they are clogged with food or other debris.
– Inspect the door and seals to ensure they are clean and debris-free.
IKEA LAGAN Dishwasher Troubleshooting:
Common Issues faced by IKEA LAGAN include:
- Not Enough Water Pressure:
The dishwasher needs a minimum of 0.04 MPa (0.6 bar) to function properly. If the water pressure is considerably low, the dishwasher will not fill properly and may not operate correctly.
- Clogged Filters or Spray Arm:
Food and other debris can build up in filters or spray arms, causing the dishwasher to not operate properly.
- Dirty Door or Seals:
Debris and dirt can build up on the door or seals, preventing the dishwasher from sealing properly and causing it to not operate correctly.
How to Unclog Filters
- Turn off the dishwasher to unplug it from the power source.
- Remove the filters by unscrewing them from the bottom of the dishwasher.
- Clean the filters with hot water and mild detergent.
- Rinse the filters thoroughly and reattach them to the bottom of the dishwasher.
- Plug the dishwasher back in and turn it on.
How to Unclog the Spray Arm
- Turn off the dishwasher and unplug it from the power source.
- Remove the spray arm by unscrewing it from the dishwasher’s top.
- Clean the spray arm with hot water and mild detergent.
- Rinse the spray arm thoroughly and reattach it to the dishwasher’s top.
- Plug the dishwasher back in and turn it on.
How to Clean the Door and Seals
- Turn off the dishwasher and unplug it from the power source.
- Clean the door and seals with hot water and mild detergent.
- Rinse the door and seal thoroughly and dry them with a soft cloth before using them again.
- Plug the dishwasher back in and turn it on.
- Remove Stuck Food/Debris
- First, try to remove the food particles by hand. If they are stuck to the dishwasher’s interior walls, use a soft-bristled brush to loosen them.
- If the food particles are still stuck, fill a bowl with equal parts white vinegar and water. Place the bowl in the dishwasher and run the dishwasher on a short cycle. The vinegar will help to loosen the stuck food particles.
After the cycle is complete, remove the bowl and run the dishwasher on a regular cycle to rinse away any residue.
- Disable Alarm codes
The IKEA LAGAN dishwasher has several different alarm codes that can help you troubleshoot problems. Let’s have a look at a list of the most common codes and their meanings:
- E1: The dishwasher is not getting enough water. Check the water supply and pressure to make sure they are adequate.
- E2: The dishwasher is not draining properly. Assess the drain hose to make sure it is not blocked.
- E3: The dishwasher is not heating the water properly. To fix this, make sure the heating element is working correctly.
- E4: The dishwasher is overfilling. Check the float switch to avoid being stuck in the open position.
- E5: The dishwasher is not washing the dishes properly. Check the spray arm to make sure it is not clogged.
- E6: The dishwasher is not drying the dishes properly. Check the heating element to make sure it is working correctly. In case of a fault, you’ll have to get it repaired to fix this issue.
- Turn Off the Salt Indicators
The salt indicator often turns on even when there is no need to add salt to the dishwasher. Multiple reasons, such as hard water or a mineral build-up in the dishwasher, lead to this.
To turn off the salt indicator, add a teaspoon of salt to the dishwasher and run the machine on a short cycle. The salt will help remove any minerals build-up and should turn off the indicator.
If the indicator does not turn off, follow the following steps.
- Press the “Start/Stop” button for 3 seconds.
- The display will show “Salt Refill.”
- Press the button again to turn off the indicator light.
- Fill the dishwasher’s salt reservoir with dishwasher salt according to the manufacturer’s instructions.
- Press the button again to restart the dishwasher.
- Fix the Reset Function
If your IKEA LAGAN dishwasher does not seem to be working properly, you may need to reset the machine. To reset the function, unplug the dishwasher from the power source and plug it back in. Again, Press the button for 3 seconds.
The display will show “Reset.” If the problem persists, get the dishwasher serviced by a professional.
Additional Tips
- Always refer to the owner’s manual for specific instructions on how to operate your dishwasher.
- If you have hard water, consider using a water softener to help extend the life of your dishwasher.
- To help prevent dishes from sticking, use a dishwasher detergent with rinse aid.
- Clean the dishwasher’s filters and spray arm regularly to prevent them from becoming clogged.
- Inspect the door gasket and seals regularly to ensure they are clean and debris-free.
- If you notice any water leaks, have the dishwasher serviced as soon as possible to prevent further
Concluding Thoughts:
If you have an IKEA LAGAN dishwasher, it is important to know how to troubleshoot common problems.
By understanding the meanings of the different alarm codes and following the step-by-step tips in this article, your dishwasher can run smoothly for years to come.
