Fixing IKEA Drawer Front Maximera Not Lining Up
- Properly Align The Drawers
Check to make sure that the drawer is properly aligned with the frame. If not, try adjusting the screws on the back of the drawer until it is aligned correctly.
To properly align the drawers, the front of the drawer should be in contact with the frame.
- Check The Hinges
To fix this issue, you need to follow the steps below.
To fix this problem, open up your IKEA drawer front and slowly raise each tab of the hinge side so that it can go past the edge of the drawer.
This happens because sometimes Ikea needs to properly slide their drawers in before closing them. After doing this, you will notice that your drawer is working properly.
When doing this, consider that if you raise it too high and the drawer is not resting correctly, then try to bend the tab down slightly.
This way, it will be able to rest again on the edge of your table but tight enough so it does not move around easily.
If you want your drawer front to stay in place permanently, make a few holes on the lower sides of your table or use double-sided tape to put your drawer front in place.
This way, it can stay firm and won’t come loose when pulling out your drawers.
Otherwise, you can always try to use these steps again if you need help fixing your drawer.
If the hinges are properly adjusted, it can prevent the drawer front from lining up.
To check the hinges, open the drawer and ensure that the gap between the door and the side of the drawer is even.
Consider adjusting the screws on the hinges until the gap is even.
If this doesn’t fix your drawer, the hardware and the order you put together must be corrected.
To check this out, we suggest you call the IKEA helpline and speak with one of their experts.
They will be able to help you troubleshoot this issue so that you can start using your drawers again.
If you still have trouble with your drawer after trying these steps, look at some of the other drawers you have in your home and see if they have the same problem.
If you notice that this issue is more common with specific types of drawers, this could be because of a design issue.
In this case, it might be a good idea to look for an alternative drawer solution that is more reliable
- Remove Obstructions
Check for obstructions; if there are any obstructions in the way of the drawer, it will prevent the drawer from lining up properly.
Remove objects blocking the drawer and try again. At times obstructions like nails or screws may become loose and fall into the way of the drawer, so make sure to check for these as well.
- Check The Rails
If the drawer is not sitting on the rails properly, it can cause the drawer front not to line up. To check the rails:
- Open the drawer and ensure it sits on it. If the drawer is not sitting level, adjust the screws on the rails until it is level.
- If the drawer is sitting on the rails properly, check the drawer front.
- Inspect both sides and ensure they are flush with each other. If there is a gap between them, adjust the screws on one side until they are flushed.
Once you have done that everything fits together properly, close and latch the drawer.
If you find the drawer front is not lining up properly, there may be a problem with the screws.
Open the drawer and check if they are loose or tightened too much. If any of them seem too tight or loose, adjust their position slightly until the drawer front is level again.
While adjusting the screws on one side will likely solve the issue, checking the screws on the other side is still advisable.
If they are not tightened properly or overtightened, this may be contributing to the problem.
To prevent drawer front misalignment in the future, make sure you regularly check your drawer hardware and tighten any loose screws as needed.
Additionally, if you notice any other problems with your drawers, it is important to address them immediately, so they do not worsen over time.
If you continue to have issues with drawer misalignment, consider contacting a professional furniture repair or assembly company for assistance.
They can assess the situation and make necessary adjustments or repairs so that your furniture functions properly.
- Adjust The Slides
When the slides need to be properly adjusted, it can cause the drawer front not to line up.
To adjust the slides, open the drawer and make sure that it is sitting level on the slides. If the drawer is not sitting level, adjust the screws on the slides until it is level.
- Check For Warping
If the drawer front is warped, it can cause the drawer not to line up. To check for warping, open the drawer and look at the front of the drawer.
If the drawer is warped, it will not flush with the frame. If the drawer is warped, you can try to adjust the screws on the hinges or rails to try and fix the issue.
- Use A Spacer
You can use a spacer if the drawer still needs to line up correctly. A spacer is a small piece of wood or plastic placed between the drawer and the frame to help fill any gaps.
You can find a spacer from a hardware store or online. To find the best spacer for your drawer, measure the gap between the drawer and the frame.
How does a spacer make a difference?
A drawer front is simply a piece of wood covering your drawer’s opening.
There are many different sizes and thicknesses, depending on what you need. Most people prefer to use IKEA drawer fronts because they are cost-effective and easy to install.
However, one issue with these drawers is that sometimes the drawer front won’t line up with the drawer opening.
This can be quite frustrating, especially if you must return it to the store and buy another one.
Fortunately, there is a way that you can make your IKEA drawer front fit perfectly every time.
A Spacer is usually a small piece of material that can be placed between the front and your drawer opening to help it line up correctly.
One common type of spacer is called a shim, which is usually made of thin plastic or metal.
To use a shim, place one end in the top corner of the drawer opening, then slide it down to the bottom, ensuring it covers the entire opening length.
Once you have the shim positioned correctly, attach your drawer front to it, and you should be ready!
If you are having trouble with your IKEA drawer fronts not lining up properly, a spacer may be just what you need.
Whether you use a shim or another type of spacer, it is an easy and effective way to ensure that your drawer front fits correctly every time.
So if you are tired of fiddling with your drawers, give a spacer a try and see how much easier your life can be!
- Replace The Drawer Front
If the drawer front still needs to line up, you may need to replace the drawer front. IKEA sells replacement drawer fronts for the Maximera line of drawers.
You can purchase a new drawer front from IKEA or a similar retailer. Measure the opening before buying a new drawer front to get one that fits correctly.
How to prevent this issue
IKEA drawer fronts tend not to line up and cause a lot of frustration.
Luckily, there are some steps you can take to prevent this issue and make sure your drawer fronts are lining up properly.
Begin with measuring the space between each drawer front as you install them on the cabinet.
If any drawer fronts are slightly narrower or wider than the others, it can throw off the alignment and cause issues.
In addition to carefully measuring each drawer as you install it, try using special hardware that helps keep your drawer fronts aligned.
Various types of drawer front alignment kits are available, so look for one that fits your needs and budget.
Once you’ve taken the necessary steps to prevent the drawer fronts from not lining up, you will be able to enjoy your IKEA cabinets without any frustration.
And with regular care and maintenance, they should remain in great shape for many years.
If you’re struggling with drawer front alignment issues in your IKEA cabinets, take these steps to prevent the problem and ensure that your drawers are properly aligned.
