When selecting a shower curtain rods, you will have to make precise measurements of your bathroom to ensure that the rod will appropriately fit the bathroom and it’s fixtures. A shower curtain rod must appropriately fit the dimensions of the shower or bathtub in which it are to be installed. If the rod is of the wrong size, it can cause the shower curtain to cling to your body, or the rod may sag in the middle of the shower.
To determine the correct size of the shower curtain rod, you will have to measure the span and the projection of the rod from the walls. The span of the shower curtain rod is the distance from one wall to the opposite wall in which the rod will be installed. The length of the rod will have to suit the size of the shower or bathtub.
How to Measure and Choose a Shower Curtain Rod
For instance, a small shower may only need a shower curtain rod that is approximately three feet long. For a bathtub, the length of the shower curtain rod may have to be approximately five feet long. Using a telescoping shower curtain rod allows you to adjust the rod according to the size of the bathtub.
Using a shower curtain rod that is too short may result in water splash out of the shower. Using a rod that is too long may cause the rod to bow under the tension of the curtain and the water. However, the rod should extend at least one or two inches past the opening in the wall to allow the shower curtain to remain in place.
The projection of the shower curtain rod is the distance that the rod extends outward from the wall. The projection of the shower curtain rod can help to determine the amount of space that you will have while in the shower. A shower curtain rod that is straight and extends close to the walls takes up little space in the bathroom, therefore, it is suitable for small bathrooms.
A curved shower curtain rod extends outward from the wall and provides additional room for your body in the shower. The height of the shower curtain rod is typically installed approximately six feet from the floor. This allows for steam to rise from the shower and into the bathroom if needed.
There are many different types of shower curtain rods available for purchase. A tension shower curtain rod can stay in place against the walls of the shower, and it dont require that you drill holes into the walls to install it. A permanent shower curtain rod is mounted into the walls with brackets and screws, and these types of rods is generally more stable than tension rods.
An L-shaped shower curtain rod is designed for bathrooms with corners in which the walls meets at ninety-degree angles. Lastly, a double shower curtain rod consists of two rods and allows you to hang a decorative shower curtain on the outside of the shower and a plastic liner on the inside of the shower. The material of the shower curtain rod will affect how long the shower curtain rod will last in the humid environment of the bathroom.
Shower curtain rods made of stainless steel and brass will resist rusting, making these types of rods good choices for bathrooms with high levels of moisture. Aluminum is a lightweight material that can be used to make shower curtain rods. However, avoid shower curtain rods whose metal component will readily rust.
Rust will damage the shower curtain rod. Before installing a shower curtain rod into the walls of the shower, verify all of the measurements. Use tape to mark the height and span of the shower curtain rod that you would like to install on the wall.
Make sure that the weight of the shower curtain that you will use is not too great for the shower curtain rod that you are considering buying. A heavy shower curtain could cause a weak shower curtain rod to sag in the walls. Additionally, make sure that the shower curtain rod that you purchase will be compatible with the hardware that is present in your bathroom.
By following these steps, you can ensure that your shower curtain rod will function correctly and that your shower curtain will remain in place during use. You should of checked the rods length first. Youll want to make sure the rod feels moddern and comfortabley fits the space.
Use a rod that is different than the ones you seen before. It is actualy alot of work to get it right. Its important to check the materiel too.
