IKEA FIXA Electric Screwdriver is an excellent choice for your home improvement projects. The IKEA FIXA has a strong electric motor that can handle tough screws and nails. It also has a soft grip that makes it easy to handle. It is lightweight and comes with a carrying case for easy portability. It operates at a power of 12 volts and has two-speed settings. The screwdriver is safe to use; it is a versatile and durable electric screwdriver that is perfect to use at home. Its powerful motor and soft grip make it easy to handle. The screwdriver is lightweight and comes with a carrying case. However, if you think the screwdriver is not powerful enough, a few things can be done to fix it.
IKEA FIXA Electric Screwdriver Not Powerful Enough
- Check Battery
The batteries must be properly inserted and charged. If they aren’t, then try using a different type of battery. A fully charged battery helps operate the screwdriver at full speed; if the batteries are weak, the screwdriver drill will also be weak.
- Check The Screws
If the screws are too tight, the electric screwdriver will have a harder time turning them. Try loosening the screws a bit before attempting to use the screwdriver on them again.
- Check The Drill Bit
Ensure that the drill bit is properly inserted and tightened. A loose or dull drill bit will make it more difficult for the screwdriver to turn screws.
- Use A Different Drill Bit
Next, check to see if the problem is with the drill bit. If the bit is too small or too big, it can cause the drill not to have enough power. Try a different size or type of drill bit.
- Pre-Drill Holes
If the screws are too tight, you may need to drill holes for the electric screwdriver. This will help the screwdriver get a better grip on the screw and loosen it up.
- Replace Screws
Consider replacing the screws. Even with an electric screwdriver, old or rusty screws can be difficult to remove. New screws will be easier to remove and won’t put as much strain on the drill.
- Faulty Motor
There could be an issue with the electric motor inside the screwdriver. Try taking it apart and cleaning it out.
- Bad Connection
Avoid a loose connection between the drill and the power source. If you’re not well equipped to assess the screwdriver on your own, consider getting help from an electrician.
- Hand Torque to Secure the Bit
If the drill seems to be slipping, you can try adding a little hand torque to help secure the bit. This will give the screwdriver more grip and make it easier to turn screws.
- Use A Lubricant
Another way to make it easier for the screwdriver to turn screws is by using a lubricant. This will help the drill bit move more smoothly and make it easier to remove screws. These are a few ways to fix an electric screwdriver that isn’t powerful enough. If you still can’t get the screwdriver to work, consider taking it to a professional for help.