While IKEA is one of the more robust brands on the market, there are still a few items offered by this brand that can be a bit hard to manage at times. This is especially true when you’re not aware of the proper assembly routine.
So, you need to reach out to the experts when you can’t seem to figure out the instructions. The professionals working at IKEA will be more than happy to help so that you can avoid situations like the IKEA trotten wobble.
The IKEA trotten is a small, lightweight stool that is perfect for use in the kitchen or bathroom. However, many people have complained that the trotten wobbles are unstable.
There is a good chance that you will run into similar issues with the unit as well.
The IKEA trotten is a piece of furniture known for its wobbling. Several factors, such as uneven floors, incorrect assembly, or loose screws, can lead to this issue. There are multiple reasons why the table is wobbling.
Ikea Trotten Wobble Fix:
1. Unequal Legs
The most common reason is that the legs of the trotten are not all the same length. To fix this, adjust the legs to make them all the same size.
Otherwise, you will not be able to get through the wobble issues. So, be sure to grab your power tools and chip away at the long legs to avoid these issues.
You will have to be very careful as you’re trying to chip away at the material. Taking out a big chunk will only lead to more errors down the road.
So, be sure to stay on your hand and only remove a smaller chunk from the legs to check the adjustment.
Most of the time, it will only take a bit of effort to adjust the legs. However, you don’t have to try out this method alone. Try seeking help from an experienced friend or reach out to the experts working at the local workshop.
Either way, you need to make sure that the length is the same for all legs, and that will be more than enough to help you get rid of the wobbling errors.
2. Try Using Cardboard
Sometimes a bit of adjustment will go a long way when you’re dealing with these issues.
Most of the owners pointed out that they had to use small pieces of cardboard to get through these issues. You will be able to develop a cushion, and the weight will adjust itself to provide a stable presentation.
All that you need to do is to check the distance from the floor and then cut out a thin piece of cardboard to stick below the trotten.
There is no need to glue it to the table, but some owners do prefer to do that as well. So, it all comes down to how you’re planning on tackling the situation.
Once the piece has been glued to the legs, you can put some pressure across all sections to eliminate the cushioning effect, and the cardboard will become more rigid.
From there, you can move around the trotten as you please without having to worry about more errors down the road.
3. Unlevel Trotten
Another reason why your trotten might wobble is that it is not level. You can try adjusting the legs to make the trotten level to fix this. There’s a possibility that the trotten is not level. Consider adjusting the feet of the trotten until it is level.
There are quite a few options here, you can cut away the excess, warp the legs, add more materials, use paper, and much more. So, be sure to try out any of these methods and then test out the wobble status from the trotten one more time.
In most situations, the issue will be fixed right here, and you will not have to deal with more errors down the road. However, we will still suggest that you seek help from a professional on how to tackle this situation.
These experts can make your job much easier and will guide you on how to keep the trotten in perfect condition. Sometimes, the issue can present itself due to improper placement of the unit, and you need to figure out the cause before implementing the fix.
Otherwise, you will be running into the same error within the same month. So, be sure to inquire more about the issue when you can’t seem to figure it out yourself.
4. Check Floor
Sometimes, it is not the trotten but the floor that is to blame here. So, you should also grab a level and then check the condition of the floor.
There might be a tile out the place, and you need to hammer it down with a rubber mallet.
You can’t expect the trotten to be level when the floor is slanted or bumpy. So, to avoid that outcome with the trotten, you need to also check the condition of the floor.
If it does seem to be slanted, a few taps with the rubber mallet will do the job.
However, if you’re still stuck in the same errors after fixing the floor, then you need to proceed with checking the screws and fixing the balance to avoid more complications.
Hopefully, you will not have to struggle much as you’re trying to fix the situation with the trotten wobble.
5. Tighten Loose Screws
A reason why your trotten might wobble is that the screws are loose. To fix this, tighten the screws. If the surface of your trotten is warped, then this could be causing the wobbling.
To fix this, you can try to sand down the surface of the trotten until it is level.
6. Balance Trotten
If the trotten is unbalanced, you can try moving the seat to a different position. To balance the trotten, consider adding weight to the trotten to balance it.
A warped Trotten can cause similar issues; If the trotten is warped, you can try straightening it out.
Once you add weight to the trotten to balance it, the wobbling gets better. Finally, if the trotten still wobbles, you can try adding weight to one side of the trotten to balance it out.
Some owners also try soaking the unit with water and then putting weight on the unit to fix the situation with the wobble. That might not seem like a bad idea at this point, and you will be able to get better stability from the unit.
These are some possible reasons why your IKEA trotten might wobble. If you have tried these solutions and the trotten still wobbles, you may need to replace the trotten.
7. Contact Customer Care
In case of any additional concerns, please consult your IKEA manual or contact IKEA customer service for further assistance.
They will be more than happy to help you through minor issues and complications with the system. There is no point in going through all of these fixes alone.
All that you need to do on your end is to reach out to the experts, and they will provide you with more details on the problem. From there, you just have to follow these details, and these experts will take care of the situation.
However, if you find that the issue is not related to the assembly and the unit itself is warped or damaged during delivery, then you need to demand a replacement.
You’re not liable for any damages that were inflicted during the delivery.
So, be sure to inform the customer care team about this situation, and they will be more than willing to help you with a fresh piece.
It all comes down to how you’re planning on addressing the situation with the trotten wobble, and involving the experts will help you through the errors.
To Summarize it Up
The most common reason why IKEA trotten wobbles are due to unequal leg lengths. You can fix this by adjusting the legs to make them all the same length.
Another reason for a trotten to wobble is because it is unlevel. To fix this, try changing the legs until the trotten is level.
A third reason wobbling can occur is due to loose screws. To fix the wobbling, you’ll have to try tightening the screws.
If the trotten is still wobbling, it might be unbalanced. You can try moving the seat to a different position or adding weight to the trotten.
Finally, if the trotten is warped, you can try straightening it out or adding weight to one side of the trotten.
If you’ve given all these solutions a shot and the trotten is still wobbling, you may need to replace the trotten.
All of these methods will help you get through the issue with the wobble. However, you can also choose to leave this job to the professionals and have them take care of the situation for you.
They will not only adjust the unit but will also guide you on how you can keep it in perfect shape.
