The IKEA Nutid dishwasher is a great addition to any kitchen. However, like any appliance, it can sometimes have issues. If your dishwasher doesn’t turn on, there are a few things you can try.
How To Fix IKEA Nutid Dishwasher Won’t Turn On?
- Plug the Power Cord into a Functional Outlet
Ensure the power cord is plugged into a working outlet before attempting other troubleshooting steps. If the outlet is not working, plug the dishwasher into a different outlet to see if that resolves the issue.
Figure out if the problem is with the cord or the outlet by plugging in another appliance to the outlet.
- Check if the Dishwasher is Turned On
If the power cord is plugged in and the outlet is working, check to see if the dishwasher is turned on. A switch near the door should turn the unit on and off. If the switch is in the “off” position, turn it to “on” and see if the dishwasher starts.
- Check if the Door is Closed Completely
If the dishwasher is turned on and the power cord is plugged in, check if the door is closed completely. If the door is not shut properly, water will not be able to enter the dishwasher and will not start.
Firmly close the door and try starting the dishwasher again.
- Ensure There is Water in the Dishwasher
If the door is shut completely and the power cord is plugged into a functional outlet, check if there is water in the dishwasher. The dishwasher will not start if there is no water.
Check the water line leading to the dishwasher and ensure no blockage. Turn on the water and check if water is entering the dishwasher.
- Reset the Dishwasher
If water is in the dishwasher and the door is shut, reset the dishwasher. Unplug the unit for 30 seconds and then plug it back in. Once the dishwasher is reset, try starting it again.
- Check The Circuit Breaker
Check the circuit breaker if the dishwasher doesn’t start after resetting it. The circuit breaker may have been tripped, causing the dishwasher to lose power. Find the circuit breaker box and flip the switch for the dishwasher.
Once the power is back on, try starting the dishwasher again.
- Replace The Pump
If the dishwasher does not start, the pump may need to be replaced. The pump is responsible for circulating water through the dishwasher. A faulty pump will prevent the dishwasher from starting.
Make sure you replace it as soon as possible. A replacement can be purchased from IKEA or a local appliance store. Replacing the pump is a job that a qualified technician should do.
- Don’t Overload the Dishwasher
One common reason why dishwashers don’t start is that they are overloaded . The dishwasher can hold a specific amount of weight; if it’s overloaded, the dishwasher will not start.
Remove some of the dishes from the dishwasher and try starting it again.
- Check for a Water Leak
A water leak can also prevent the dishwasher from starting. Check for any signs of a water leak and Repair the leak if necessary. Once the leak is fixed, try starting the dishwasher again.
- Faulty Wiring:
If the dishwasher still doesn’t start, the wiring may be an issue. Check the wiring and make sure everything is connected properly. If the wiring is damaged, it will need to be replaced. This is a job that a qualified technician should do.
To Prevent this Issue:
- Do not overload the dishwasher. Overloading the dishwasher can cause the pump to fail.
- Do not operate the dishwasher without water.
- Running the dishwasher without water can damage the pump. Be sure to close the door properly. If the door is not shut all the way, water will not be able to enter the dishwasher.
- Check the water line leading to the dishwasher periodically. If the line becomes clogged, it will prevent water from entering the dishwasher.
IKEA Dishwasher Not Starting – Conclusion
There are several reasons why an IKEA dishwasher may not start. The most common cause is a power issue. After you’ve plugged the power cord in, ensure the power cord is plugged in and the outlet is working.
If the dishwasher still does not start, reset the unit. If the dishwasher continues to malfunction, contact a qualified technician for further diagnosis and repair.
