A few Common reasons why the extendable desk leg won’t lock
IKEA Extendable Desk Leg Not Locking
- The clips that are supposed to hold the extension in place are not properly aligned
- The tension of the spring inside the extendable desk leg is too high or too low
- Something is blocking the locking mechanism from engaging
- The extendable desk leg is bent or damaged
- The Desk Frame is not aligned correctly
- The Locking mechanism is damaged
- Screws are damaged
- Knobs aren’t tight enough
Let’s go over a few easy tips you can use to fix these issues.
- Properly Fixate The Frame
The IKEA extendable desk leg may not be locking because the extension is not fully inserted into the frame. The correct way to fully fixate the extension inside the frame is by gently pushing and turning it until you hear a click.
- Check if The Locking Mechanism is Damaged
The IKEA extendable desk leg may also not be locking because the locking mechanism is damaged or broken. The locking mechanism helps to keep the extension in place, so if it is damaged, the desk will not be able to stay locked.
- Replace Damaged Screws
Another reason why the IKEA extendable desk leg may not be locking is because of damaged or stripped screws. With time, the screws become loose and eventually oust the threading,
- Tighten The Knob
Another reason why the IKEA extendable desk leg may not be locking is because the knob is not tightened properly. To properly tighten the knob, hold the frame in place and use your other hand to twist the knob clockwise until it is snug.
- Check The Alignment Of The Holes
If the extendable desk leg holes are not aligned with the frame, the desk will not lock properly. To align the holes properly, use a hammer to tap the extendable desk leg into place.
- Replace The Damaged Parts
If the IKEA extendable desk leg is not locking because of damaged parts, you’ll have to replace those parts. You can find replacement parts at IKEA or a hardware store.
- Use The Right Screws
If you use the wrong screws to fixate the IKEA extendable desk leg, it will not lock properly. Make sure the screws are also tight enough, so they don’t strip the threading. If you follow these steps, you should be able to fix the IKEA extendable desk leg so that it locks properly.
Conclusion
If your IKEA extendable desk leg is not locking, it could be for several reasons. The most common reasons are that the clips are not properly aligned, the tension of the spring is off, or something is blocking the locking mechanism. You can usually fix these issues by properly aligning the clips, adjusting the tension of the spring, or replacing the damaged parts. If you use the wrong screws to fixate the extendable desk leg, it will not lock properly. Make sure the screws are also tight enough, so they don’t strip the threading. With these tips, you should be able to fix your IKEA extendable desk leg so that it locks properly.