The IKEA ANSLUTA remote is a remote control that allows you to operate your IKEA ANSLUTA-compatible lights. The remote comes with two buttons; one for on/off and one for light dimming.
If you’re having trouble getting your IKEA ANSLUTA remote working, don’t worry – you’re not alone.
Many people have reported this issue, and we’re here to help troubleshoot and fix it.
In this blog post, we’ll discuss the possible causes of this problem and provide some solutions that might help get your remote up and running again.
Possible causes of the IKEA ANSLUTA remote not working:
- Dead batteries:This is the most common cause of a remote not working. If your remote is not responding, check the batteries first and replace them if necessary.
- Dirty or damaged buttons:Another possible reason your IKEA ANSLUTA remote is not working properly is that the controls are dirty or broken. If the buttons are sticky or not responding properly, you can try cleaning them with a soft cloth or using a button-pressing tool.
- Faulty receiver:If your IKEA ANSLUTA remote still isn’t working after you’ve tried replacing the batteries and cleaning the buttons, the next step is to check the receiver. The receiver is the component that receives the signal from the remote and passes it on to the light. If the receiver is not working properly, it could be because it’s damaged or dirty.
- Incorrect code:Finally, if you’re still having trouble with your IKEA ANSLUTA remote, it could be because you’re using the wrong code. The code is a four-digit number that tells the remote which light to control. If unsure what code to use, you can check the manual or look up the code online.
Now let’s get into the in-depth troubleshooting tips:
IKEA ANSLUTA Remote Not Working
- Pair The Devices
Before troubleshooting your remote, ensure that the ANSLUTA remote pairs with the IKEA appliance it is meant to control.
The pairing process varies depending on the model of the ANSLUTA remote, so consult your user manual for specific instructions.
Once the devices pair, you’ll be able to use the remote to control the appliance.
Before using the app, you need to ensure that your devices are paired with each other. The process is simple and straightforward and should only take a few minutes to complete.
To pair the devices:
- Make sure that both devices are turned on and within range.
- On the device you want to control, open the Settings app and tap Bluetooth.
- Tap the switch next to Bluetooth to turn it on.
- Wait a moment for the device to scan for other Bluetooth devices.
- When the other device appears in the list of devices, tap it to pair them.
- If asked, enter the passcode for the other device.
- Once the devices are paired, you can start using the app.
After the pairing is done, you should be able to use the app to control the other device. If you’re still having trouble, ensure both devices are within range of each other and try again.
- Check The Connection
Another possible reason your ANSLUTA remote is not working is that the connection between the remote and the appliance is lost.
To fix this, turn off both devices and turn them back on again. This should re-establish the connection and allow you to use the remote.
A poor connection can also cause the remote to work intermittently, so if you’re having trouble with the remote being unresponsive, this is likely the cause.
If you still have trouble following these steps, contact IKEA customer service for further assistance.
These are the most common reasons your ANSLUTA remote might not work. By following these troubleshooting steps, you should be able to fix the problem and get your remote working again.
- Resync The Remote
It’s also possible that the remote and the appliance have become out of sync with each other. This can happen if the remote is turned off for an extended period or the batteries are removed.
To fix this, simply turn both devices off and back on again. This will resync the remote and the appliance and should allow the remote to work properly.
If the remote is still not working, you may need to resync it with a different device. To do this, turn off both devices and unplug the appliance from the power outlet.
Next, plug the machine back in and turn it on. Once it’s powered on, press and hold the pairing button on the remote for three seconds.
This will resync the remote and should allow you to use it again.
- Check The Batteries
If the ANSLUTA remote is not working, one of the first things you should check is the batteries. If the batteries are low or dead, you’ll have to replace them to get the remote working again.
Insert new batteries into the remote and try using it again. The issue with fresh batteries is that the old batteries may have leaked and corroded the battery compartment.
If this is the case, you’ll need to clean the compartment before inserting new batteries.
Consider using a cotton swab dipped in rubbing alcohol to properly clean the compartment. Gently scrub the area until the corrosion is removed.
- Check The Range
The ANSLUTA remote uses Bluetooth to communicate with the IKEA appliance. It has a limited range and may not work if you’re too far from the appliance.
If you’re having trouble using the remote, try moving closer. You should be within 10 meters (33 feet) for the remote to work properly.
If you’re still having trouble, something may interfere with the signal. Common culprits include walls, doors, and other appliances.
If you think there may be interference, try moving closer to the appliance or removing any obstacles between you and the appliance.
- Restart The Appliance
Try restarting the IKEA appliance if you’re still having trouble using the ANSLUTA remote. To do this, unplug the appliance from the power outlet and plug it back in.
Once the appliance restarts, try using the remote again.
You’ll need to turn off the circuit breaker to restart the appliance if the appliance is hardwired. Once the appliance restarts, try using the remote again.
- Reset The Remote
If the batteries are not the problem, consider resetting the ANSLUTA remote. To reset the remote, hold the power button for 10 seconds.
This will reset the remote and hopefully fix any issues you were having. Resetting the remote will also delete any saved settings, so you’ll need to reprogram the remote after resetting it.
Mostly, resetting the remote solves the connectivity issues.
- Resync The Remote
If the remote is still not working, you may need to resync it with the appliance. To do this, turn off both devices and unplug the appliance from the power outlet.
Next, plug the appliance back in and turn it on. Once it’s powered on, press and hold the pairing button for 5 seconds. After that, the remote will successfully pair with the appliance.
Try using it again to see if it is working. The remote is in sync with the appliance it is responding to. So, if there’s a problem with the appliance, the remote may not work too.
- Fix The Wiring
If the ANSLUTA remote is still not working, there may be an issue with the wiring. First, check the power cord to ensure it is in the socket.
If it is, you will need to check the wiring inside the appliance. If you identify loose wiring, you’ll have to secure it. Once you have checked the wiring, try using the remote again.
- Replace The Remote
If none of the above steps work, you may need to replace the remote. You can buy a new ANSLUTA remote from the IKEA website or a local retailer.
Once you have a new remote, follow the instructions in the user manual to pair it with the appliance.
Once the remote pairs, you’ll be able to use the remote to control the appliance. A new remote would cost you around 25-30 dollars.
To Sum it Up:
The ANSLUTA remote uses Bluetooth to communicate with the IKEA appliance. It has a limited range and may not work if you’re too far from the appliance.
If you’re having trouble using the remote, try moving closer to the appliance. You should be within 10 meters (33 feet) of the appliance for the remote to work properly.
If you’re still having trouble, something may interfere with the signal. Common culprits include walls, doors, and other appliances.
If you think there may be interference, try moving closer to the appliance or removing any obstacles between you and the appliance.
Try restarting the IKEA appliance if you’re still having trouble using the ANSLUTA remote. To do this, unplug the appliance from the power outlet and plug it back in.
Once the appliance restarts, try using the remote again.
If none of the above steps work, you may need to replace the remote. You can buy a new ANSLUTA remote from the IKEA website or a local retailer.
Once you have a new remote, follow the instructions in the user manual to pair it with the appliance. Once the remote pairs, you’ll be able to use the remote to control the appliance. We hope this article was helpful.
I can not figure out how to get the back off of the watch to get to the batteries!
I can not figure out how to get the back off of the switch to get to the batteries!
Behind the sticky tab there lies a single small Phillips screw. You undo that then use a flathead on one side of the rocker you’ll see a cutout for using the flathead to prise them apart.
My remote is paired and works everywhere in the kitchen and even outside the house but on the wall where it is in the kitchen about 3 meters from the plug that it controls it suddenly won’t talk to the plug. I have to take it off its magnetic coupling and press it in hand to work. Why does the original location on its mount suddenly have issues?