Eyelets is the metal ring that are placed into the fabric of the curtains to enable the curtain to slide onto the rod. If the eyelet size dont match the curtain rod size, the curtains will not slide smooth on the rod. The size of the eyelets determine how well the curtains will move on the rod.
For this reason, an eyelet size chart are necessary to determine the appropriate size of the eyelet for the curtain rod. The eyelet size chart indicates the size of the rod that should be used with the curtain eyelet to ensure that the curtain will function correct. An eyelet consists of three main part: the front cap, the back washer, and the inner bore.
How to choose the right eyelet size for curtains
The front cap is the part of the eyelet that is visible on the fabric. The back washer is the part of the eyelet that grips the curtain fabric. The inner bore is the hole in the center of the eyelet.
The size of the inner bore of the eyelet will determine the amount of space between the curtain rod and the eyelet. If the inner bore of the eyelet is too small for the curtain rod, there will be friction between these two component that will make it difficult for the curtain to move. However, if the inner bore is too large for the size of the curtain rod, the curtain will sway excessive on the rod and not remain in one position.
The size of the eyelet that should be used for the curtain will depend on the thickness of the curtain rod. For instance, thinner curtain rods will require eyelets with smaller inner bores than thick curtain rod. Many curtain manufacturer will provide a measurement of the amount of “play” that should be provided between the curtain rod and the eyelet.
The “play” is the small gap between the rod and the eyelet. A small gap will allow the curtain to glide easy on the rod, while a larger gap allows the curtain more movement. The weight and thickness of the curtain fabric will determine the type of eyelet you will need to purchase for that fabric.
For the lightest fabrics, such as sheer voiles, you will want to use smaller eyelets to prevent the fabric from puckering at the edge of the curtain. For the heavier fabrics, such as velvet or thick linen, you will need larger and more stronger eyelets to prevent the curtain from sagging beneath the weight of the fabric. Using eyelets that are too small for a heavy curtain fabric may result in the curtain tearing at the edges of the fabric.
Similarly, using eyelets that are too large for a light curtain fabric will prevent the curtain from hanging correct. One way to test the compatibility of the eyelet and fabric is to press the ring of the eyelet against a scrap piece of the curtain fabric to ensure it grips the fabric proper. Another factor to consider when installing the eyelets into the curtain fabric is the spacing between the eyelets.
If the spacing between the eyelets is too large, the curtain panels will have gaps between the eyelets when they are open. If the spacing is too small, the curtain panels may create awkward folds in the fabric when they are allowed to drape from the curtain rod. The ideal distance between the eyelets should be approximately 15 to 20 centimeters in the center of each curtain panel.
Depending on the width of the curtain panels, you may have to place more eyelets along the header of the curtain to ensure the even distribution of the eyelets. The final factor to consider is the finish of the eyelet. The finish refers to the appearance of the metal of the eyelet.
You can choose the finish of the eyelet to match the finish of the curtain rod. Some common metal finishes for eyelets include brushed nickel, antique bronze, matte black, steel, chrome, brass, and copper. The finish of the eyelet can either be the same as the curtain rod or be different to create a contrasting visual effect.
In cases where the curtains will be installed in a particularly humid area within the house, such as the kitchen, you can use plastic eyelets because plastic eyelets are more durable in humid environments. To install the eyelets into the curtain panels, there are a few steps that you can follow. First, mark the positions of the eyelets onto the fabric using tailor’s chalk.
Second, use a hollow punch to punch a hole in the fabric that is slightly smaller in diameter than the outer rim of the eyelet. Third, place the curtain fabric between the front cap of the eyelet and the back washer of the eyelet and crimp the eyelet using a hand tool or a bench press. Ensure that you apply even pressure to the eyelet when crimping because uneven pressure on the eyelet will cause the eyelets to wobble when the curtains is hanging from the rod.
In summarizing this topic, it is necessary to ensure that the eyelet bore is matched with the curtain rod and that the eyelet size is matched with the weight of the fabric being utilized. By ensuring that the eyelet bore is the same diameter as the curtain rod and the eyelet size is appropriate for the weight of the fabric that will be used to create the curtains, the curtains will slide onto the rod easy and will allow for the curtains to drape in a natural way. Thus, individuals should always refer to an eyelet size chart to ensure that the size of the eyelets matches the weight of the fabric prior to beginning the installation process.
It could of been easier if you check the chart first. You’ll want to make sure everything is perfect for teh room’s look. Its important to pick the right one so they dont slip.
You should of checked the rod size first. If you dont, the eyelets might not fit modulern curtains. You’re gonna want to make sure the colors match too.
The rod’s finish should be checked against the eyelets. Many people dissapears into the details of choosing the right metal. It can be alot of work.
