When you choose an curtain rod for your windows, you must consider three much different factors: the width of the curtain rod, the mounting height of the curtain rod, and the weight of the curtains. The curtain rod is a piece of hardware that allow curtains to remain in place on a window. If the curtain rod is too short for the window, the curtains will not stack proper on the rod.
Additionally, if the curtain rod is too thin for the curtains, the curtains may cause the rod to sag. To determine the width of the curtain rod that you need, you must measure the width of the window. However, you should also add to this measurement the amount of width that you need for the curtains to stack back away from the window glass.
How to Choose a Curtain Rod
Allowing the curtains to stack back away from the glass will make it more easier for the curtains to cover the window properly. Additionally, allowing the curtains to extend beyond the window will allow more sunlight to enter the room through the window. Because the curtain rod extends beyond the window frame, the window will appear larger than the window actualy is in the room.
The mounting height of the curtain rod is another factor to consider when selecting a curtain rod for your windows. The mounting height of the curtain rod can be above the window frame or closer to the ceiling in the room. If you select a mounting height for the curtain rod that is closer to the ceiling, the ceiling will appear more higher in the room to the human eye.
Additionally, the walls in the room will also appear taller if the mounting height of the curtain rod is lower. If the curtains are long, the mounting height will also impact where the curtains lands on the floor. The longer the curtains are selected for the room, the higher the curtain rods mounting height must be to the floor to allow them to reach the floor correctly.
Finally, the diameter of the curtain rod should match the weight of the curtains. The lighter the curtains are, the thinner the curtain rod should be. Sheer fabrics, for example, will have less weight than velvet or curtains with a lining, meaning the curtains will require a thick curtain rod to evenly distribute its weight.
Using a thin curtain rod for heavy curtains will cause the rod to sag or bend under the weight of those curtains. Furthermore, the weight of the curtains will cause the brackets that hold the rod to the wall to experience a great deal of stress. T
There are many different types of curtain rods that can be used.
A single curtain rod is used for one layer of fabric. However, a double curtain rod allow for two types of fabric to be hung on the rod. Sheer curtains can be hung on one rod, while you hang blackout curtains on the second rod to control the amount of light that enter the room.
Another type of curtain rod is a tension rod. These rods do not require drilling into the wall to be installed. This is helpful for those who are renting there homes.
Bypass tracks allow curtains to glide past each other. These are often used for closets. Cafe rods are small curtain rods that cover the bottom half of the window.
These rods are often used in kitchens. Another factor to consider with curtain rods is the material that is used to make the rod. Steel rods are strong and can hold heavy weight of fabric.
Aluminum rods are good for resisting rust. Wood rods can create a more traditional look for the room. However, if the room contains high humidity, the wood may warp.
Finally, when installing the rods, make sure that the brackets are even and correctly space. If the brackets are too far apart from each other, the rod may sag in the middle of the window. Therefore, ensure that you place the brackets frequently along the window to support the curtain rod and its weight.
